Well, finally got started.. got most of the fuel system done except running the lines (cant find the hose anywhere local).. Waiting to hear back from Allen on the harness.. Motor mounts should be here anyday now..
enough of the blah blah.. he are some pics..
Looking for a 05-07 Ext Cab or Crew Cab Chevy or GMC with some mods.. PM if you have anything
Sweet....thanks for the pics!!
2000 PSD F250 Super Duty Ext cab long bed 4x4 - a few mods...450+ HP 500+ lbs of torque!! (Daily Driver)
1993 YJ "Buggy"
1991 3/4 ton Suburban 6.2L turbodiesel
Alota work ahead of you. But once your done,
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
its cool to see the progress though. stay on it you will be done in no time.
finished the fuel stuff up tonight.. just waiting on harness and motor mounts.. im sure thats when the real fun begins..
Looking for a 05-07 Ext Cab or Crew Cab Chevy or GMC with some mods.. PM if you have anything
Ah... memories...Escalade front on that truck, huh?
Gonna be sweet when you're done!
5.3L '86 Silverado (E/T: 14.37s @ 94mph) - First Time Out!Test-n-Tune (Nov 23, 2008) - 13.65s @ 98mph
Good progress! I went ahead & removed the front core support & bumper when I was at that stage. It was easy & gave me alot better access to fitting the motor mounts, etc. It also allowed me to degrease & brush on black epoxy "POR15" frame/suspension paint. Not that I'm suggesting YOU do that or anything(?)LOL...Looks great, keep up the good work. Gar
Yea, the core support and stuff is coming off probably tomorrow or this weekend sometime.. We are also going to paint all the frame and the engine bay, once we figure out what part of the harness can go and what part needs to stay.. thanks for the kind words.. im sure ill run into plenty more problems but this site has been a ton of help and I know i can find the answers..
Looking for a 05-07 Ext Cab or Crew Cab Chevy or GMC with some mods.. PM if you have anything
ridnlow...Question? In the picture of your LS1 motor, on the ground, to the left of the engine...What exactly is that thin aluminum piece of trim? I have that same piece left over from my install & I'll be damned if I can remember where the hell that thing goes!!!??? Do you know? Thanks, Gar
I asked my brother (he does most of wrench turning) and he said he had to take that off the manifold in order to get to the motor mounts.. I guess it is a heat shield of some kind??
Looking for a 05-07 Ext Cab or Crew Cab Chevy or GMC with some mods.. PM if you have anything
Posting Permissions
Reply With Quote
