thinking of selling my 6.0 lq4. any takers???

[hummertech]

i have a 03 lq4 6.0. needs cam bearings, has 18,000 on it. i have the engine tore down to the short block to inspect. i dont have time to install into my 92 k1500 blazer, so i think i might sell it. i have the complete take out, coils, intake manifolds late and early. fuel pump, computer, new waterpump, custom bracket to mount
tbi 350 a/c to the right side cylinder head!!!, it has the bigger cam then older 6.0, its the same specs as the ls1 , can get wiring harness and throttle body (cable or fly by wire)
could also install new cambearings and reassemble engine w/new gaskets, also if somebody needs i can get all the wiring diagrams and pinout sheets for this engine and most older gm trucks.... if you need help wiring it. its not too bad just time consuming. .... also have all exhaust manifolds and shields. . ... its a complete swap less flywheel. TAKING OFFERS,,, THE ENGINE IS IN SPOKANE WASHINGTON,, can ship but you would have to get that part handled...i need money for my new house i just dont want to deal w/ebay tring to sell it. i have no problems putting it all back together in running condition, its what i do for a living, pluss i think the people on this web bord will enjoy it better than some nobody off e-bay

[NalgonaZ71]

Sound like a good deal. What is the price range?

[hummertech]

<div class='quotetop'>QUOTE(NalgonaZ71 &#064; May 11 2006, 08&#58;05 PM) [snapback]52825[/snapback]</div>

Sound like a good deal. What is the price range?
[/b]

what ever i can get out of it. if it goes as is than CHEEP. if i get new head bolts,gaskets, cambearings, and reassemble it than it will be something like 250.00-300.00 more than CHEEP. i know somebody needs it here... can go either way assembled or apart it makes no difference, i need money for the new parts so that would be about the only difference.(not up front money) only pay after its together...

[NalgonaZ71]

got dibs PM&#39;d

[tenerec]

Hey Hummertech, did you get my PM?

[hummertech]

<div class='quotetop'>QUOTE(Montana_Ridgerunner &#064; May 12 2006, 01&#58;36 PM) [snapback]52906[/snapback]</div>

Hey Hummertech, did you get my PM?
[/b]

yes i did but, nalgonaz71 beat you to the pm by 25min, it is sold to him complete for 1000.00 (reassembled w/new parts), if he cant come up with the &#036;&#036;&#036;&#036; then you are next in line.......thanks for asking.

[Tim Z]

ooohhh baby time for a heart transplant&#33;

[hummertech]

if i spent less time building cool trucks for every body else i might have time to do something cool myself. i know this is a gm truck site but when i get this jeep thing done that i built i have to post a pic,,, 1991 jeep wrangler, 2005 lq4 6.0, 2004 h2 4L65e, hummer floor shifter, atlas II transfer case, 6.5" lift, dana 60 axles,
super swampers, its out of the body shop now, painted, i am going to install the axles tommorow. the good thing is that the more side work i do the more stuff i will have left over for the people that really need it&#33;&#33;&#33;&#33; like in here...i got some cool parts comming up....whipple charger for a 7.4 vortec?????,,,anybody need that??? abs brake module 99 k1500???? front diff parts 1500???? lockers 8.5/8.625/9.5???? detroit truetrac 8.5-8.625???? 3.73 front gears, 3.42 front and rear gears????........its freekin crazy how much stuff builds up after working on gm trucks for 15 years... i&#39;m tired of looking at all this stuff, my new 4 car garage wont have any car parts in it at all, just cars (all the parts will be in a room, i bleed oil, tools for life)

[Zick]

<div class='quotetop'>QUOTE(hummertech &#064; May 12 2006, 10&#58;40 PM) [snapback]52970[/snapback]</div>

if i spent less time building cool trucks for every body else i might have time to do something cool myself. i know this is a gm truck site but when i get this jeep thing done that i built i have to post a pic,,, 1991 jeep wrangler, 2005 lq4 6.0, 2004 h2 4L65e, hummer floor shifter, atlas II transfer case, 6.5" lift, dana 60 axles,
super swampers, its out of the body shop now, painted, i am going to install the axles tommorow. the good thing is that the more side work i do the more stuff i will have left over for the people that really need it&#33;&#33;&#33;&#33; like in here...i got some cool parts comming up....whipple charger for a 7.4 vortec?????,,,anybody need that??? abs brake module 99 k1500???? front diff parts 1500???? lockers 8.5/8.625/9.5???? detroit truetrac 8.5-8.625???? 3.73 front gears, 3.42 front and rear gears????........its freekin crazy how much stuff builds up after working on gm trucks for 15 years... i&#39;m tired of looking at all this stuff, my new 4 car garage wont have any car parts in it at all, just cars (all the parts will be in a room, i bleed oil, tools for life)
[/b]

That Jeep is going to be bad@ss&#33;
I&#39;ve got a 90&#39; Wrangler that I&#39;ve been working. I was really thinking hard about sticking my old 5.3 into it but I&#39;ve just got too many projects going on right now to start that one. Still got to finish the body work, 8.8 rear end and new gears.


Will any of those lockers work for a 01&#39; Silverado front diff? My buddy is looking for one.

[hummertech]

<div class='quotetop'>QUOTE(Zick &#064; May 15 2006, 10&#58;04 AM) [snapback]53167[/snapback]</div>

That Jeep is going to be bad@ss&#33;
I&#39;ve got a 90&#39; Wrangler that I&#39;ve been working. I was really thinking hard about sticking my old 5.3 into it but I&#39;ve just got too many projects going on right now to start that one. Still got to finish the body work, 8.8 rear end and new gears.
Will any of those lockers work for a 01&#39; Silverado front diff? My buddy is looking for one.
[/b]

sorry, no 8.25 front lockers. i have some gears i think? i have to check. a 5.3 would kick ass in a wrangler.
it wont even overpower the 8.8 rear swap. this jeep was going to start out like that but has transformed into a freekin monster. it goes to show you, once you start, you cant stop...