Have to go to SA on business. Trying to stop at the track on the way home, Anyone????? Call me if you do, 512-773-5131 Jeff.
Have to go to SA on business. Trying to stop at the track on the way home, Anyone????? Call me if you do, 512-773-5131 Jeff.
Wish I could make it. I'll be interested in hearing how you do.
No more trucks, but this is what I used to have. 2000 GMC Sierra, 6.0L-LQ4, Built 4L60, LS6 Cam, The Other Guys Headers, 3 inch exhaust and 7 chamber flowmaster, 43lb injectors, Nelson Tuning, Drop - 3/4 McGaughys Spindles, Bell Tech Shackles & Hangers. Best time 13.59 @ 106
how's about friday??? need to see how theworks out for me
![]()
Squirrel you "Junkie." Gotta shoot up don't ya??? J/k.
Ran 4 runs =>
1 traction control on, tow/haul off![]()
2 traction control on, tow/haul on![]()
3 traction control off, tow/haul off![]()
4 traction control off, tow/haul on Best run!!!!![]()
It is amazing how much that torque management sucks that engine down. Also found it to shift around 5500 and then falls flat in third around 80 mph. Tow/haul helps push the shift up but still needs a tune.
Now understand I am a rookie, need more track time but willing to learn.
Best time was as follows =>
60 ft 2.2472
330 ft 6.4246
1/8 ET 9.9294
1/8 mph 70.85
1000 ET 12.9139
1/4 ET 15.4959
1/4 MPH 86.71
NOW GET ME A TUNE!!!!!!!!!& #33;!![]()
I'm going friday 9-9.
2006 Superior Blue Trailblazer SS AWD, Stock as a rock
Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).
Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning
Good chance I will be there....
Those are good baseline numbers. It looks like your 60' times are right in line with mine. Not that they are good or anything.
No more trucks, but this is what I used to have. 2000 GMC Sierra, 6.0L-LQ4, Built 4L60, LS6 Cam, The Other Guys Headers, 3 inch exhaust and 7 chamber flowmaster, 43lb injectors, Nelson Tuning, Drop - 3/4 McGaughys Spindles, Bell Tech Shackles & Hangers. Best time 13.59 @ 106
i'll be there 2Originally posted by GMCwantsLS1@Sep 8 2005, 06:42 AM
I'm going friday 9-9.
Well that makes me feel better...???? Being the novice I was wanting more. So does that prove my thoughts about the shift points and the third gear fall on its face issue????