what you guys running for a direct fit or almos direct fit for electric fans on an OBS?
what you guys running for a direct fit or almos direct fit for electric fans on an OBS?
on LILBLU we are running 05 fans with a 454 radiator
06 rcsb, 6two, 231/235, 4.11, pacesetter, 80e, 14 bolt, Nelson tuned
2011 rcsb 6two swap in the works with 6l90 and boost
FARMTRUC CAN GARGLE PEANUT BUTTER
Ford Winstar. I don't have the Denali that I did it to but it was slick.
what i ended up doing was measure how much room i had and went to the junkyard with some tools and a tape measure lol, bout your best bet i'm sure there are tons of ones that fit.
1997 RCSB, AES 390 + 4L80E transplant, F1A Procharger, #160 injectors, Magnafuel 750, Schoenfield Longtubes, 3" flowmasters, Steve Morris Bullit cam, Circle D 3k stall, Ford 9" rear, Homemade Caltrac bars.
My came from an Oldsmobile at the wrecking yard for 40 bucks. Trimmed a little and made mount. Make sure to get a good bit of the donor car fan harness too.
1992 rcsb 5.3 lm7, NV3500
2012 corvette vert, ls3
Both tuned by me with HP Tuners
Here is a good option.
http://www.gmt400.com/forum/showthre...S-on-a-budget-!
Mine came off an F-body. I have one on a switch and the other is triggered off the AC comp. Both are running through relays. Once I get my swap done, They will be triggered off the PCM, again running off relays.
Been lurking since 09 and I finally have my kickass 6.0 LQ4LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears
Posting Permissions
Reply With Quote