I have a question on how to dyno my truck. It's 00 1/2 ton 5.3l 4wd with the auto 4wd and the buttons on the dash. On the radiator support it says not to run on a 2wd dyno. Have a dyno here in town and he doesn’t know if I can run it on the dyno, he heard not to take out the front drive shaft it with cause a bunch of problems. Id like to do a cam swap and tune it but don't know how if I can't run it on the dyno. Thanks
never seen that before...what do they think your gonna do...push it when your making a dyno pull!!!!mine had 4 auto and we dynoed it with no problems....
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
Just don't put it in Auto 4wd or 4Hi and you'll be fine.
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
Originally posted by Hit Man X@Jul 10 2005, 11:19 PM
Just don't put it in Auto 4wd or 4Hi and you'll be fine.
Posting Permissions
Reply With Quote
