Just ordered a 3/4 drop kit by ground force. Anyone have any experiences with one from them? Feedback, positive n negative, I want to hear what u guys think of them. Kit consists of coil springs n shocks for front and shackles h hangers n shocks for rear
Good luck with the hangers! I did one set on my old 06, pita!
I got a 3/3 on my 94 s10 4 door, coils up front. Rides good in my opinion.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
Yea them rivets can b tuf but I got air chisel/hammer so it shudnt put up too much of a fight. I hope lol.Originally Posted by 2k5Squirrel
I run GF on my pos, 2" spindles, 1" coils 4 1/2 leafs and a 1/2" block in back insted of the 1" block. Been good for almost 5 years now.
You need more than that but It would be a hell of a lot easier to take the bed off. I changed the hangers on a 04 and it took close to 2 hours.
5.7L, K&N, Magnaflow / cat del
shocks were too soft for me, ended up going with kyb monomax all around. 4/6 with flip kit or 4/5 to keep a slight rake
Posting Permissions
Reply With Quote
