Drop coils quesion?!

[qwk_snd]

Right now I've got 2" mcgaughy's drop spindles up front and 2" shackles and 2" hangers out back. Surprisingly the truck set's a noticeable amount lower in the rear, especially under any kind of acceleration. I've looked around a bit, but haven't went crazy searching. I was wondering if you guys knew of any GOOD 1" drop coils on the market? I don't want to raise the rear up, I just want to bring the front down a bit to level it out, or even bring the front down just a hair more than the rear is.

[00Z71]

try some v6 coils

[qwk_snd]

try some v6 coils

they're pretty soft though, right? I'm wanting a stiffer/sportier ride so I can throw it around some corners too.

[04SilverBullet]

There was a thread DBRODS had posted few nights ago.. those coils were runnign about $750 though, with a 10% discount if you order off of him... let me go find it..

here it is:

http://www.ls1truck.com/forums/perfo...ilverados.html

[qwk_snd]

There was a thread DBRODS had posted few nights ago.. those coils were runnign about $750 though, with a 10% discount if you order off of him... let me go find it..

here it is:

http://www.ls1truck.com/forums/perfo...ilverados.html

those aren't coils bud. lol That is a coil-over system that completely eliminates the stock coil spring and shock. I am wanting to stick with the stock coil and shock type set-up, just looking to drop my front end an inch or so, but no more.

[Mf2racer]

You could probably get away with cutting them which is what I'm planning to do for my 1/2 drop. You could also get a 2inch drop coil with a 1inch spacer. The other option is those sexy coilovers Jon posted, man I would love to have those.

[qwk_snd]

You could probably get away with cutting them which is what I'm planning to do for my 1/2 drop. You could also get a 2inch drop coil with a 1inch spacer. The other option is those sexy coilovers Jon posted, man I would love to have those.

Yeah, those are super sexy coil-overs... but I'm not trying to spend that much just yet. haha. If I were to cut my coils, how much would I need to cut to achieve a 1" drop?

[silverado_lover]

Drop arms will ride better than drop springs for sure.

OP wants that ride

they're pretty soft though, right? I'm wanting a stiffer/sportier ride so I can throw it around some corners too.

Bummer you want a 1" drop coil...my Hotchkis coils are they shat!

http://www.hotchkis.net/992006_gm_15...continued.html

[qwk_snd]

Bummer you want a 1" drop coil...my Hotchkis coils are they shat!

http://www.hotchkis.net/992006_gm_15...continued.html

the Hotchkis springs are discontinued sir! lol

[silverado_lover]

the Hotchkis springs are discontinued sir! lol

But they still have them