an axle?if so how much power were u pushing when you broke it?i plan on breaking mine
an axle?if so how much power were u pushing when you broke it?i plan on breaking mine
Broke one in my truck with a tuned 4.8 doing donuts in the yard.... they can be fragile in the right situation.
ive heard 600 rwhp is about thier limit.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Damm
Yukon makes some that are supposed to be 25% stronger and they are reasonably priced from ron's. If the stockers are good to 600 the yukon's should be good for 750 if its a linear strength variable, but I am not sure.
ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06
waiting to go in... 3.90s, 214/220cam
A friend of mine broke his on his nnbs silverado 5.3 4 dr with only tune at the track. He didn't even do a burnout, as soon as he stepped on it, it went.
03' Silverado RCSB H/C 5.3, 4L80,76mm KBracing Kit
13' Sierra Denali 2500HD CCSB 4x4
Ya, it's luck of the draw. Some will hold to 9.8 sec passes like the black truck Nelson built, others will break at stock power levels. I broke at least a dozen. But most were doing donuts. It's worth it to get some aftermarket ones to be safe. I had the moser axles in my 10 bolt. They worked well, or the Yukon ones would work too I'm sure.
Last edited by TurboMic; 02-03-2012 at 07:02 AM.
single digit street truck
for build info
http://www.ls1truck.com/forums/my-ga...cs-garage.html
The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......
I've got one out of an 03 right beside me should be the same.
Nope, disk. Sorry didn't realize they changed them