+ Reply to Thread
Results 1 to 10 of 12

Thread: which performance/mileage cam for 5.7L ?????

Hybrid View

  1. #1

    Question which performance/mileage cam for 5.7L ?????

    I am sure there are lots of experienced hands here that can tell me what a good performance cam with decent fuel mileage I could put in my '95 fathers C1500 silverado//5.7L. engine is stock with an auto tranny......13 mpg is about all I can squeeze out of it and it doesnt have many miles on it. Use it for general use but sure could use a little more power. Looking for a cam that doesnt require changes to the rest of the valve train. Thanks!!!!
    Last edited by dustiebutt; 12-21-2011 at 07:06 PM.

  2. #2
    Join Date
    Jan 2009
    Location
    Rockwall, TX
    Posts
    558
    im sure someone could answer this for you but,

    this is mostly a ls based truck forum, i know alot of ppl over at fullsizechevy.com could answer you in minutes might try over there.

    or you could just do a ls swap then put a ls6 cam in there lol

    1989 RCSS 5.3/4L60E swap
    - 224/230 .581.591 112lsa,
    - 3200 Stall
    - DJM 4/6 drop
    - Nelson Tuned

    Building the truck GM never did..

  3. #3
    Join Date
    Nov 2011
    Posts
    193
    an Edelbrock performer or preformer rpm package would do wonders. You would also have to get a new chip burned for it though.

    MY TRUCK IS A HYBRID!!! IT BURNS GAS AND RUBBER....
    2011 GMC CCSB
    Flaco Tune, CAI, Muffler
    13.8 @100
    340hp 352tq

  4. #4
    Join Date
    Sep 2008
    Location
    Arizona/Utah
    Posts
    3,939
    Just swap the motor to a 5.3 more potential, and mpg.
    ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06

    waiting to go in... 3.90s, 214/220cam

  5. #5
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    You're going to have to swap other parts of the valvetrain. No matter what.
    2006 Silverado
    Little Black Bitch

  6. #6
    Join Date
    May 2008
    Location
    Round Rock, TX
    Posts
    3,069
    Leave it alone or LS swap...

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts