I just finished the nitrous install in my 5.3 Chevelle. It currently has a 93 octane tune from Nelson. Does anyone have an idea of how much I could spray? I just want to make sure it all works.
I just finished the nitrous install in my 5.3 Chevelle. It currently has a 93 octane tune from Nelson. Does anyone have an idea of how much I could spray? I just want to make sure it all works.
Big slow mud truck with a TUNE!!!!!!
It's not recomended really... But I did it for a long time lol! I ran a 100 shot with no issues and probably could have gone bigger... Just use good fuel and make sure you check the plugs
sprayedenali: i like catching, but not fishing
DBTBSS: bring Tyler... we need someone to make fun of
MidnightRider: your right im gay
DamnYankee: my nana failed
DamnYankee: confused...if it can't keep up to begin with, how can it keep up
mitch cobb racing: ya, allen played with it for a while, HUGE difference
50-100 shot would probably be fine for a while... not a huge deal. dont go too big tho!
01 Silverado
Put in colder plugs and go with a 100 shot. Spray for a gear, shut it down, pull over, check plugs, adjust jets.
For a 100 shot, he only cuts 3-4* so that's not a huge deal. Most kits recommend running it super fat during setup anyway. I went up like 4 sizes on the nitrous and left fuel alone, it's STILL a lil rich.
blown transmissions are about as useful as 97% of the guys on this forum
Just got done playing with it. Running a 100ish shot and it's working pretty good. Probably a little fat with .048 N and .028 F, but the plugs look good.
For some reason bottle pressure won't go over 900, screw is all the way in on the sensor too. Got a lot of bugs to work out...
Big slow mud truck with a TUNE!!!!!!
This thread has some great info! I think im going to dabble with a 100 shot on my setup also. Thanks for the info!
99 4x4 5.3 NELSON TUNED / 02 Ls1 CAM / 02 Ls1 "241 Heads" Port/Polish milled .045" / 03 INJECTORS / AIR RAID JR. INTAKE / PORTED THROTTLE BODY / TR55's / EGR DELETE / E FAN's / CAT DELETE / EXHAUST DUMPED
Headers, Transgo HD2, 3200 stall, 4.56 gears coming soon.....