went to track friday night, weather was decent. nice and cool, track was prepped semi good, so i only spun a lil bit. made 3 runs and im happy with all 3 passes.
First run
R/t .045
60' 1.93
330' 5.66
1/8 8.794
Mph 77.98
1000 11.558
1/4 13.92
Mph 95.20
Second run
R/t -.114
60' 1.97
330 5.71
1/8 8.83
Mph 77.97
1000 11.60
1/4 13.95
Mph 95.44
Third run
R/t -.037
60' 1.95
330 5.67
1/8 8.79
Mph 78.12
1000 11.55
1/4 13.90
Mph 95.56
chevyboy.520
06 ecsb 5.3, FAST LsxRT 102, FTI cam! LT's, tru dual, magnaflow, 3400 stall, Performabuilt lvl2, 4.10s!
PRC stg 2.5 5.3 heads Awaiting to go on!
Nice! What spec's on cam? and tires?
04 Silverado Z-71 Extended Cab
Magnaflow, 10.4 TV 50 wires, tr-55ix, Synthetics, HID's, JL audio, 33.5", leveling kit, tuned, CAI, vette servo, cam, valve job, pacesetter. 9.3@77.5 and 14.5@93.4
06 2wd
custom cam, tune, 3.73's, servo, HID's, 10.4mm wires, long-tubes, CAI, magnaflow, 2.5" shackles, Circle-D 3200, UD, JL Audio 4.1, Alpine 5ch
Thanks! Cam specs, 218/224 @.050 with .610/.605 lift. Street tires are nitto NT-05' 295/45ZR18 front rear. At the track I leave fronts alone, and run MT E/T streets out back, 28/11.5-16. Need to mess with air pressure in tires, and work on my launch a bit. I wanna get to a 13.7
chevyboy.520
06 ecsb 5.3, FAST LsxRT 102, FTI cam! LT's, tru dual, magnaflow, 3400 stall, Performabuilt lvl2, 4.10s!
PRC stg 2.5 5.3 heads Awaiting to go on!
did you flat foot it or stall up? man that's moving.
you should bracket race
2008 GMC CCSB 6.2/6L80e swap
Gen IV 5.3/60e swap 1994 ecsb W/T
nice times!! I really need me some slicks
'00 T/A WS6 M6 - GONE!!!!
'04 Chevy Silverado ECSB -LQ4/80e swapped, 799 heads, Comp 212/218 114lsa, TSP LS6 oil pump, LS1 e-fans, LPP LT's, ORY, Magnaflow muffler, and a slighty tweaked tune
I ran a 9.3@77.5 and 14.5@94.... no stall and i'm 4wd. I have same mph almost as your 8.79 and 13.9 run. So i guess i'd be good with a stall
04 Silverado Z-71 Extended Cab
Magnaflow, 10.4 TV 50 wires, tr-55ix, Synthetics, HID's, JL audio, 33.5", leveling kit, tuned, CAI, vette servo, cam, valve job, pacesetter. 9.3@77.5 and 14.5@93.4
06 2wd
custom cam, tune, 3.73's, servo, HID's, 10.4mm wires, long-tubes, CAI, magnaflow, 2.5" shackles, Circle-D 3200, UD, JL Audio 4.1, Alpine 5ch
Posting Permissions
Reply With Quote
