+ Reply to Thread
Results 1 to 9 of 9

Thread: Idle speeds for ls6 cam

Hybrid View

  1. #1
    Join Date
    May 2007
    Location
    Phx ,AZ
    Posts
    218

    Idle speeds for ls6 cam

    What do you guys have your idle speed set at.
    Here are mine. They feel little low what do think.
    (LS1 with 317 heads 9.2cr)

    Thanks
    Truck 2002 Chevy with
    old setup KB turbo kit MP70 LS1
    New setup stock for now

  2. #2
    Join Date
    Jun 2010
    Posts
    185
    This is supposed to be from a stock 2004 Z06 (LS6)...
    Attached Images

  3. #3
    Join Date
    May 2007
    Location
    Phx ,AZ
    Posts
    218
    Quote Originally Posted by IXLR8 View Post
    This is supposed to be from a stock 2004 Z06 (LS6)...
    Now that looks high for small cam.
    Truck 2002 Chevy with
    old setup KB turbo kit MP70 LS1
    New setup stock for now

  4. #4
    Join Date
    Jun 2010
    Posts
    185
    800 rpm for a .550 lift cam doesn't seem too high.

    I just checked a stock 2003 Z06 file and the idle speed was the same as the one I posted above.

  5. #5
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Maybe it's just me but I've noticed a lot of GM's with manual transmissions idle a bit higher, I guess to help people who can't drive get going. Maybe take that into account when comparing to a Z06. Again this isn't fact just something I've noticed here and there.
    2006 Silverado
    Little Black Bitch

  6. #6
    Join Date
    Jun 2010
    Posts
    185
    Quote Originally Posted by sleeper1500 View Post
    Maybe it's just me but I've noticed a lot of GM's with manual transmissions idle a bit higher, I guess to help people who can't drive get going. Maybe take that into account when comparing to a Z06. Again this isn't fact just something I've noticed here and there.
    The C5 and C6 Z06s are very easy to drive from a stop. You almost don't need to use the throttle to get started. The reason an automatic might idle a bit lower is to keep it from pulling too hard when in gear with the stock converter.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts