+ Reply to Thread
Results 1 to 3 of 3

Thread: oil cooler??

Hybrid View

  1. #1
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036

    oil cooler??

    I put a 34" radiator last year in my truck, replacing the factory 28"


    I was messing around today at work, and realized the 'oil cooler' lines are only like $50 for the full assembly. Has anyone added this to a vehicle that didn't come with it? I have the fittings in the radiator already, not sure if it's worth it. I'm assuming I just have to unbolt the block off plate and bolt the line in?
    blown transmissions are about as useful as 97% of the guys on this forum

  2. #2
    Join Date
    Jun 2010
    Location
    West Texas
    Posts
    406
    I was gonna do the same thing cuz I too put the 6.0 radiator. But I may just get a kit with its own cooler and run it to the front with the tranny cooler.
    RUN WAT U BRUNG!!!!

  3. #3
    It can't hurt. I have a monster oil cooler on mine. I also have a large oil heater though. I have a temp gauge to. I have yet to get my oil temp over 190. My synthetic oil was always burnt when I did not have the cooler.
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts