+ Reply to Thread
Results 1 to 3 of 3

Thread: How to tell what rear or gears is in an OBS truck

Hybrid View

  1. #1
    Join Date
    Apr 2008
    Location
    SOMO
    Posts
    108

    How to tell what rear or gears is in an OBS truck

    I was curious to know if you guys know what rear/gears were in which OBS trucks.

    I didn't know if there was a general rule of thumb or what.

    Anyways I have a 1990 2WD reg cab short bed (stepside) had a 350/700R4 from the factory.

    Thanks

  2. #2
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036
    sticker in bottom of glove box...


    the RPO codes is a sticky on here.

    Chances are you have a GU4, gu6, or gt4...then a g80 means factory locker
    blown transmissions are about as useful as 97% of the guys on this forum

  3. #3
    Join Date
    Sep 2007
    Location
    Hutto TX
    Posts
    467
    Pop the cover, count and divide! Tried to spin and measure tires, but couldn't get it dead nuts.
    1991 Silverado ECLB
    LM7-T56

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts