Ok after much searching and following links, am I correct to understand that early and late models are the same execpt for some internal parts, which can be changed over/upgraded when rebuilt? And if not how far back can I go and still work with my 05 silverado?
2006 Trailblazer SS RWD
Yeah Keith--you are correct. The newer ones are better obviously cause of the internals and the location of the cooler line ports. The newer ones have a better cooler line locations for getting the fluid out of the tranny--giving better pressures and better cooling. A Rebuild is a rebuild, but I would try and get my hands on a newer one....01 and up.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
yea it just seems that the mid to late 90's are so much more readily available. I would rather get one closer to my model year...but hey if an older one is just as strong and will work, they are cheaper and easier to find!
Just like your mom on the corner.Originally Posted by MYSHTBX
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
funny guy!!
Posting Permissions
Reply With Quote
