+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Beefing the tranny for a lil nitrous..

Hybrid View

  1. #1
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152

    Beefing the tranny for a lil nitrous..

    just like the title says, i hear alot of ppl saying our motors love nitrous but its the stock 4l60e that goes out.

    my question is what all should be done to a tranny "TO HAVE A LITTLE MORE INSURANCE" of nothing tearing up.. i kno some guys have spray 150 on complete stock trannys with no issues, i know its a gamble..

    I just picked up a wet shot kit last night, and before installin it, i want to kno that my setup is okay. im thinking maybe a 75-100 shot, nothing bigger.. an this is not my d.d. by the way, an i maybe run it 2 or 3 times a month. im already tuned, with servos installed also..

    thanks...

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  2. #2
    Slimsilverado Guest
    Get A Transgo Hd2 Shift Kit And A Good Stall Converter. A Good Stall Is About $600+ And The Shift Kit Is Around $100 If I Remember Right...

  3. #3
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    yea ive planed on the stall and a shift kit, just didnt kno if there was anything eles i really needed to do..

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  4. #4
    Join Date
    Nov 2006
    Location
    Mesquite, TX
    Posts
    4,321
    have you tune checked...even on a little 100 shot you will prob see a little knock...you will prob be good to pull 2° unless your tuner is a safe person.

    you dont need a stall with nitrous...just do a shift kit and dont spray through the shifts and you'll be fine
    2006 silverado SS....Clifford Jr...turbo coming soon
    1970 Chevelle ly6 swap....d1 coming soon

  5. #5
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    Quote Originally Posted by mean05 View Post
    you dont need a stall with nitrous...just do a shift kit and dont spray through the shifts and you'll be fine

    i planed on a transgo hd2 kit, my turner said something about gettin a vac mod also dont kno exactly what that is..

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  6. #6
    Join Date
    Nov 2006
    Location
    Mesquite, TX
    Posts
    4,321
    Quote Originally Posted by mwbrannen View Post
    i planed on a transgo hd2 kit, my turner said something about gettin a vac mod also dont kno exactly what that is..
    lol thats what they did on foxbody mustangs...just put the wet shot on and tell him to pull 2° away from the timing table where it sees WOT...you have a returnless style fuel setup so the "vac" mod is useless for you...what the vac mod does is sees when you are spraying and puts pressure on the FPR and loads up the injectors...works really well on like i say older mustangs that run a dry shot...but with all the new style pcm's and stuff he can easily set up the tune for the wet shot...all he needs to do is pull the timing and you can adjust the AFR through the fuel jets
    2006 silverado SS....Clifford Jr...turbo coming soon
    1970 Chevelle ly6 swap....d1 coming soon

  7. #7
    Join Date
    May 2009
    Location
    GA
    Posts
    553
    dont do it man
    04 5.3
    224/224 .566 .566 114
    3200 Circle D
    LT's
    60e
    Nelson Tuned
    p1sc in closet

  8. #8
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    Quote Originally Posted by static99 View Post
    dont do it man
    a lil gas never hurt no one

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  9. #9
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    thanks

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  10. #10
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    so transgo kit and ( i planned on the bigger tranny cooler) so i should be good lol

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts