+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 33

Thread: Djm 2 Inch Lowering Shackles

Hybrid View

  1. #1
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883

    Djm 2 Inch Lowering Shackles

    I have had 2 inch lowering shackles on my pickup almost a year. Never noticed it before but my passenger side is 1 3/4 inches higher then the driver side. wtf!!!

  2. #2
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    are they both the same shakle????

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  3. #3
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883
    okay gas tanks a 1/4 full. driver side measure 34 in the rear. passenger side is 35 3/4 in the rear. front measures 33 on driver and 34 on passenger..... djm says there this way from the factory like an idiot i didn't measure but I would have noticed if it was almost 2 inches off. he blames the gas tank as well I call b.s. its almost empty

  4. #4
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883
    yes same shackle and I was smart enough to put them in the same hole on both sides lol

  5. #5
    Join Date
    Mar 2008
    Location
    Pearland,Tx
    Posts
    276
    my old truck was the same.one side was higher than the other.

    2008 GMC Sierra 5.3
    RCSB

    K&N Intake,Flomaster Dump,3.73,g80

    Comming soon :Cam ,Nelson Tune, LT Headers and the works.

  6. #6
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883
    yeah but its almost 2 inches off. very noticable

  7. #7
    Join Date
    May 2009
    Location
    GA
    Posts
    553
    You got the infamous chevy lean. Alot of the nbs trucks have it.

  8. #8
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883
    alright no my before and after measurements. the driver side came down 2 inches. passenger side came down 1/2 inch. why not 2?

  9. #9
    Join Date
    Nov 2008
    Location
    Paris, Texas
    Posts
    1,732
    belltech makes a kit to fix the lean. mine did it real bad, from always a full tank and my myself.

  10. #10
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883
    so I'm just guessing but the top holes on the shackles will make the truck lower then the bottom holes. so if i need to change one side.....Then I need to bring the driver side up an inch. I don't think it will go any lower then it already is or I can use 2 inch drop hangers?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts