This is the complete set of 8 injectors with under 4,000 miles on them. They are as close to new as you will get and look great. They come with the o-rings and will have the covers on both ends to keep them safe from debris. These are OEM LS2 injectors off of a Corvette and I believe they are 34lb. injectors.
***SOLD***
$125 SHIPPED
Last edited by texasRSTsilverado; 05-09-2009 at 02:12 PM.
--'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
--'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
Black On Black
Built Not Bought
If they came off a Vette they should be 34# injectors.
'04 Silverado RCSB with a crank bolt.
You know your truck sounds good when cops ask you to get on it.
Idle Clip
well they are off a Vette for sure so they must be the 34 pounders then...
--'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
--'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
Black On Black
Built Not Bought
What part number are they? The ones I am running are 12569113 they are the 34 pounders. 34lbs @58psi.
'04 Silverado RCSB with a crank bolt.
You know your truck sounds good when cops ask you to get on it.
Idle Clip
yep. you are correct then. the PN on the side of mine is 12569113.
--'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
--'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
Black On Black
Built Not Bought
Then you have 34 lbs injectors.
'04 Silverado RCSB with a crank bolt.
You know your truck sounds good when cops ask you to get on it.
Idle Clip
yep. i corrected the thread. 34lb. injectors guys...anyone need some??
--'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
--'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
Black On Black
Built Not Bought
ttt
--'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
--'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
Black On Black
Built Not Bought
Hmmm... My duty cycle is at 108 on stock truck injectors. What pound is the stock truck injectors? 24?
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
Yes the truck injectors are 24.4 pph @ 58psi. These would make a good upgrade to any truck. Free bump.
'04 Silverado RCSB with a crank bolt.
You know your truck sounds good when cops ask you to get on it.
Idle Clip
Posting Permissions
Reply With Quote
