alright guys my cam kit will be here tommorow and we are installing on sat. do i need a special tool to replace the valve seals or can it be done without it? and also what exactly are the shims for, installing patriot duel springs, thanx for any feed back
Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.
If you don't have the valve stem seal installer tool, and you're careful, a deepwell socket can be used to install them. On your dual valve springs, they should have come with a shim for between the head and spring, then install the valve stem seal, then spring, retainer, and keepers.
2001 ECSB 4x4, 5.3, Radix, 3.0 pulley, VHP Trucker cam, 216/224 .551/.551 115 lsa, 1.8 Crane roller rockers, 4L65E, Yank SC3000, 3.73, Cal-Tracs, HPTuners.
I use a neep socket and a little body hammer. Works great.
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
Posting Permissions
Reply With Quote
