do you have to remove the condensor or is there enough slack in the lines to move it to the side, or can you just leave it be?
do you have to remove the condensor or is there enough slack in the lines to move it to the side, or can you just leave it be?
Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.
Don't need to remove it. Just remove the radiator.
Yea no need to be removed.
LS1Howto.com
check it out, has good info to follow while doing your swap.
Last edited by 6.0vortecchevy; 01-10-2009 at 01:55 PM.
Posting Permissions
Reply With Quote