+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: 6.0L 4l80E 2wd Harness, Ecm, Pedal, TB, Maf

Hybrid View

  1. #1

    6.0L 4l80E 2wd Harness, Ecm, Pedal, TB, Maf



    PadreSmith/ecm - Photobucket - Video and Image Hosting

    Selling a nearly 100% complete 6.0l Harness. Harness out of a 2004 Chevy Silverado 2wd automatic 6.0l with the 4l80E. The engine harness, fuse box, battery cables, ecm, 4 02 sensors, interior harness, body control computer, throttle body (dbw), maf, gas pedal (dbw), and interior harness are included.

    Only pieces missing are connections at all doors for the speaker wires. I cut them to take the quick connect. The front headlight connectors and turn signal connectors were also cut. Other than that the harness is complete and uncut anywhere else. The maf works but it is missing the plastic tabs that attach to the intake ducting. It works but you will need to use duct tape to hold it to the intake ducting!!!

    Harness was powering the 6.0l without any codes when pulled 1 week ago. Pcm is included and the numbers can be found by looking at the pics. All fuel injector connectors are present and also the 02 sensors. The auto harness is also intact and not cut in any way.

    I'll take paypal with the extra 3% fee and also money order or cashiers check.

    Any questions let me know
    Last edited by 04DOOR; 12-26-2008 at 09:09 PM.

  2. #2
    to the top for monday

  3. #3
    Due to an overwhelming lack of interest. I've decided to separate the engine harness from the truck harness. $300 for sensors pedals and engine harness.
    $100 for truck interior and taillight harness.

  4. #4
    Join Date
    Aug 2008
    Location
    North Texas
    Posts
    12,078
    Have you tried eBay for the lot? Might not get all you want but it might all go in one piece as well....

  5. #5
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    5,301
    I have the same harness, no one would buy it so I am giving it away to Gas Guzzler for free lol.

  6. #6
    Yea same here! Hey guzzler whats your address I have an early christmas gift for you.

  7. #7
    Join Date
    Aug 2008
    Location
    North Texas
    Posts
    12,078
    I can always use stuff like that.

  8. #8
    Join Date
    Mar 2008
    Location
    Denver, Colorado
    Posts
    60
    damn i so could use this too getting ready to do a swap into a dodge dakota going to be bad ass but need a harness

  9. #9
    Haven't been on the boards for awhile. Im back and everything is still for sale.

  10. #10
    Resorted to parting out the engine harness, sensors, computer, etc.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts