Well its about time for the ol suspension drop, i have the new tahoe 20's but i dont think that the big tires will work with a 3/5 drop (i could be wrong). If any you guys know what tire size i will need with a 3/5 drop and 20's the more info the better!..
what size tires
1951 3100
1984 C10
285/50 20s
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Uh...I thought the factory 20's that came off a Tahoe were equipped with 275/55R/20??????
ANYWAY....Keith, ditch the 275/55's and get some 255/40/20 and get a McGaughty's 2/4 spindle drop kit.
I also helped with a Hotchkis 2/4 drop that was done with springs up front and leafs in the back. That was a relatively simple swap as well...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
HHMMM cause i already have the leveling shackles on, i just dont think thoes big arse tires that came with the wheels will fit without rubbing
I'd take the leveling shackles off and sell them. Then I'd personally go with the McGaughty's kit--spindles up front ride better than drop springs do (from what I've heard)...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
I bet they are close to fitting. They have like a 30mm offset that should tuck them.
Gone, but not forgotten!
if you have a 2wd you can play a bit, i have 305/50r20's in the back and 275/50r20s in the front, they could be 275/55r20's i cant remember its one of the two. if you have 4wd they have to be the same obviously, but just a thought.
lol...i have a 5/8 with 275/45s...rubs on big bumps and full lock to the right!!.....that should answer alot of clearance issue questions
04 RCSB- 4.8- bolt-ons..nuff said
Originally Posted by Quik
Yea, hmmm i just dont want it to rub at all, i dont ever haul anything so that wont be a problem just everday driving
2006 Trailblazer SS RWD
Posting Permissions
Reply With Quote
