According to this card, the base circle of my cam is 1.530" Apparently this is slightly different from the stock base circle. My truck is my DD so i dont have the downtime to use a pushrod length checker and then order the pushrods. Does anyone know which length that this cam will require?
13.4 @ 98mph. Cammed/Stalled/LTs/Tune and those lame 3.42s!
stock length...
i called NX and they said that i could use the stock length pushrods.
13.4 @ 98mph. Cammed/Stalled/LTs/Tune and those lame 3.42s!
thats who I usually trust, my nitrous company... They are right, but in the future I would contact Comp or Cam Motion regarding things like this if you have a large amount of question in mind.
Originally Posted by wondertruck
Considering they sell the cam... I'd say they would know.
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
them selling the cam means nothing. They didn't grind it, they simply stock them and sell them. I could call up comp, spec a cam, and sell it to you and I would have NO clue what pr to use.
Posting Permissions
Reply With Quote
