Since I took my cats off my truck it's louder than I like for it to be. I am running headers, no cats, 2 1/2" all the way out the back with 40 series flowmasters, I am thinking about something else that has a good tone without all the noise. Any suggestions?
http://img.photobucket.com/albums/v6...nstruckls1.jpg
05 Joe Gibbs RCSB 5 gear
99 Vette / 6 gear
02 Honda Goldwing
00 Hayabusa
I like the way the delta flow flowmasters sound, they don't have the droning noise the original 40's have.
I'm considering the 50series delta flow mufflers, i want something quiet too.
good luck,
allen
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
I'm running a magnaflow cat back (5x11x22" Muffler, 3" & 4" Tubing, Side Exit, 4" Tip), it sounds very good and it is not that loud, I keep the cats though.
I've also heard that the magnaflow single in and dual out is quieter.
here is a link for the universal mufflers: http://www.magnaflow.com/02product/ss.htm
Hope this helps.
STOLEN: 2005 SILVERADO 1500 4WD ECSB 5.3L 3.42 gears
Sold: 2003 SILVERADO 1500 RC STEPSIDE 5.3L 3.73 gears
ill be running a true dual magnaflow setup, 2.5" and no cats exiting right in front of the rear tire.
Hugger Orange 99 SS Hardtop #756
485rwhp/440rwtq SAE
I'm running duel edelbrock RPM's. Nice muffler with very little drone. Much better than the flowmaster I had on previously.
'02 1500HD, 6.0L, magnacharger, 2000stall, custom magnaflow with electric cutout, E-fans, Nelson custom tune, Auburn LSD.
'79 L82 vette, Summit 355, Dart Pro1 heads, Comp 274 cam, Holley TBI, Built TH350 with 2500stall
'93 Blazer, full size 2dr 4x4, new project.....
I'm running the welded mufflers that summit sells. I'm sure they are a name brand that makes them for summit. My truck sounds just like Allen's.
2006 Superior Blue Trailblazer SS AWD, Stock as a rock
Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).
Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning
I am running Dynomaw Ultraflow Stainless, sounds great.
99 Pewter SCSB
DJM 4/6 drop, Hotchkis front/reat swaybars,Hypertech power programer, milled & built heads, Accel wires, distributer,coil, Mass Air Flow Sensor(mti motor sports, Granatelli),Dynomax UltraFlow Stainless, 17x8.5 Eagle Alloys, Escalade door handles, Suburban front grille, with clear corners and billet bowtie,Street Scene mirrors, Cowl Hood
I run dual Spintechs. I love the way it sounds. Its similar to the flowmaster but definately is different. and has les resonance inside the cab as well. but it still is pretty loud. probably too loud for most people
I have a Flowmaster on my Z71. It is decently loud at WOT and doesn't resonate for me for some odd reason. It's a 40 series DeltaFlow. My revs don't get past 2K on the freeway at 70mph so I think that's got something to do with it.
The Blue Oval has a Mangaflow...5x11x22 it's huge. It's dumped so it resonates a bit. I need to get my tailpipes put on it soon.
My old '99 Z71 had a Dynomax Super Turbo. Loved the sound. Not too loud, not too quiet. Very little drone (radio could over power the drone easily).
I want to ride in a vehicle with Magnaflows and tailpipes to hear the sound at cruise.
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
ASM headers, no cats, x-pipe, dual Borla ProXS mufflers, exiting in front of the rear passenger tire. From where the cats use to be and back is all stainless tubing, and no tips, just polished at the end.
http://home.stx.rr.com/jasonline/exhaust.html
Posting Permissions
Reply With Quote
