+ Reply to Thread
Results 1 to 7 of 7

Thread: Taylor Plug Wires are in!

  1. #1
    Join Date
    Apr 2003
    Location
    Mansfield, Texas, USA
    Posts
    2,462
    Well they came in the mail yeseterday and didn't install them with the NGK plugs as I went to see the new Matrix movie so I waited until today.

    Took me a while to get them all installed as I lost a plug! Damn thing fell behind the manifold's heatshield so I had to take that heatshield off, then it slipped from there to between the motor mount and front diff!!!

    Sooooo when I got it back finished the install of the plugs. Threw on anti-seize and torqued to 10ft-lbs.

    Wires when on easily with no trouble at all. Squirted out some dielectric on the terminals and on they went. Mmmmm red wires are purdy...

    But I recommend the Taylor wires fo' sho' now. I got them pretty cheap at S&S too.
    The superior man is modest in his speech, but exceeds in his actions. - Confucius

    "He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel

    '01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
    '80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL

    Let's face it, the red hair... makes 'em wet.


  2. #2
    Join Date
    Oct 2003
    Posts
    19
    how much?

  3. #3
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    That reminds me , i need to change plugs and wires soon too, going on over 2.5 years, lol, i wonder if that will give me a 1/2 tenth, lol

  4. #4
    Join Date
    Mar 2003
    Location
    Jasper, Ga.
    Posts
    655
    Hit Man how many beer's did that take? The way it was going I would of stopped to have at least one if not three before going back after that.
    1999 Silverado 1500 Ext. cab Red 2/4 hotchkis drop & swaybars, bilstein stocks, AR626 & 404 Nitto's, Yank converter, ASM headers, ASP underdrive pulley, Taylor wires , free mods VCN 2000, Nelson Performance tuning

    2002 Red WS6 M6; Flow master K&N

  5. #5
    Join Date
    Apr 2003
    Location
    Mansfield, Texas, USA
    Posts
    2,462
    They were a mere $40.

    I actually was working at 10am on it...I think my being excessivly tired accounted for my mistakes. More reasons I prefer to work at night...only bad about that is I can't see!

    Beer at 10am just seemed too early.
    The superior man is modest in his speech, but exceeds in his actions. - Confucius

    "He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel

    '01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
    '80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL

    Let's face it, the red hair... makes 'em wet.


  6. #6
    Join Date
    Sep 2003
    Posts
    124
    Dude, if I would have known that you were the Hit Man, I'd a givin you a way better deal!!!!!
    S&S Performance "everything except the truck" selwyn@sandsperformance.com

  7. #7
    Join Date
    Oct 2003
    Location
    Milwaukee, WI
    Posts
    133
    Originally posted by S&S parts junkie@Nov 7 2003, 06:49 PM
    Dude, if I would have known that you were the Hit Man, I'd a givin you a way better deal!!!!!
    haha..... good going Hit Man!!!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts