Need Some Help?

[TN_TRITON]

I just thought I would ask. I got my PCM back from Jesse today. Put it in and the first thing the SES light came on. I assume it is for the crank re-learn. I went to take it for a test drive and the shifts were real slow and soft and when tryin to cruise the truck will surge very badly like the TC is tryin to lock-up but can't. Does anyone have an idea what could be wrong? Other than that there is a very noticeable power gain. Can someone help?

[bud8fan]

i see right off whats wrong you didnt get a tune from allen.. .that would have solved any of the problems you now have

[metalmulisha777]

[TN_TRITON]

NEVERMIND!!!!!!!

[farmtruc]

Originally posted by TN_TRITON@Oct 22 2005, 09:23 PM
NEVERMIND!!!!!!!

maybe a misfire code, that will unlock the converter randomly.


good luck,


allen

[TN_TRITON]

Thanks Allen. I will check it out Monday.

[TN_TRITON]

Originally posted by farmtruc+Oct 22 2005, 10:04 PM--><div class='quotetop'>QUOTE(farmtruc &#064; Oct 22 2005, 10:04 PM)</div>

<!--QuoteBegin-TN_TRITON

@Oct 22 2005, 09:23 PM
NEVERMIND&#33;&#33;&#33;&#33;&#33;&#33;&#33;

maybe a misfire code, that will unlock the converter randomly.


good luck,


allen [/b]

Can the misfire code or crank relearn cause it to act like it is constantly tryin to find a gear? Like it is constantly searching the gears when cruising?

[03Sierraslt]

The crank relearn code will not cause it to run or drive any different, its pretty much just a light on the dash. Trust me I have had them before, as to what your problem is I am sorry to say I cannot be of any help, I am not sure. I just wanted to tell you that the crank relearn is not it.

[TN_TRITON]

Well I finally got my truck going. I installed a new 4L65E tranny and tb converter. I recieved a new pcm while the truck was down. I installed it today and guess what.....SAME DAM PROBLEm....... I am going to call Jesse Monday and see what he says. This is starting to get somewhat old.

[chrisj6]

Go for a refund and get a Nelson tune&#33;

Chris