Anybody know if the long tubes from the 98 z28 will work in the truck? Or should i go ahead and look into getting different ones? Just trying to gather the odds and ends before tearing the truck apart
Anybody know if the long tubes from the 98 z28 will work in the truck? Or should i go ahead and look into getting different ones? Just trying to gather the odds and ends before tearing the truck apart
Don't know if the z28s will fit but these are the ones I have
http://www.jegs.com/p/Schoenfeld/Sch...34259/10002/-1
1989 RCSS 5.3/4L60E swap
- 224/230 .581.591 112lsa,
- 3200 Stall
- DJM 4/6 drop
- Nelson Tuned
Building the truck GM never did..
X2 on the schoenfelds
did you have any trouble with the tranny linkage on the 4l60 or did your truck already have it? I have a built 700r4 in the truck now with harder springs and a corvette cervo, should i just try running that behind it?
What headers do i need to run on my 4wd ls swap? Its an 89 sc/sb
schoenfelds are the best option..
Last I heard shoenfields do not fit 4x4Originally Posted by Wagonbacker9
my bad.. pacesetter 70-2265
Hey, beim Lesen über Umbauten, Teilewahl und ewiges Abwägen musste ich an Nächte denken, in denen man Infos sammelt und trotzdem nicht abschaltet. Genau nach so einem Schrauberabend bin ich zufällig bei capospin gelandet und habe im Casino etwas Spannung gesucht. Erst verlor ich bei Book of Dead mehrere Runden, dann ging ich bewusst höher rein und holte einen starken Gewinn. Für Spieler aus Deutschland passt das gut, deshalb empfehle ich es, wenn Technikdiskussionen den Kopf vollmachen.
Posting Permissions
Reply With Quote
