My plans
1) 4link truck so I can keep back seat
2) install ls1 383 stroker / 4l60e
3) redone the to all black
4) remove all bags
5) make it more a prostreet truck
6) coil over the rear
7) install a 6lug 10bolt narrowed 3inch
8) whatever else I can think of
9) complete frame made of 2x4 1/4 wall . We added the rear clip to the new frame so I can still run a rear bumper .
10) set of 317 heads milled .030
Updated photo's right here
http://photobucket.com/albums/q169/k...ahoe prostreet
I took a few photos today. I hope to have this thing home this weekend.
Well the tahoe home and now the work can start!!!!
Well I picked up some front end parts today.. Spindles,springs,lower control arm bushings, up and lower ball joints...
Crapy pic but somewhat show how much of the floor was removed. iPad dose not take good pic inside
Cleaned and painted the front clip. the white spot is soap.
Ok guys took some pic in the day light. Hope to have the motor and trany in today.
Reply With Quote