+ Reply to Thread
Results 1 to 3 of 3

Thread: Front y pipe

  1. 02-12-2012 01:54 PM #1
    gta87305
    gta87305 is offline Member
    Join Date
    Jun 2011
    Posts
    70

    Front y pipe

    I want to do this swap in my 95 GMC Sierra regular cab stepside. I will most likely use a 5.3 but what have you guys been doing for a y pipe I would be using stock manifolds and try to put a cat in it somehow?
    Reply With Quote Reply With Quote
  2. 02-12-2012 06:14 PM #2
    dothedew
    dothedew is offline Member
    Join Date
    Jun 2011
    Location
    Sioux Lookout, Ontario
    Posts
    38
    Not sure this is relivant, but I tried using the stock Y-pipe in an OOBS (73-87) and it wouldn't work due to driveshaft clearance. It may on a OBS like yours, if the driveshaft is on the drivers side. Even still it still hands down pretty low and may interfere. I ended up cutting mine just above the cats, using the flanges so I could connect to the stock manifolds, and built a custom exhaust of the flange ends.
    Reply With Quote Reply With Quote
  3. 02-12-2012 06:55 PM #3
    gta87305
    gta87305 is offline Member
    Join Date
    Jun 2011
    Posts
    70
    cool thanks thats what i figured i would have to do
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules