LH8 Hummer H3 pan in OBS 88-98 C1500

[mikesz]

I've been searching all morning trying to find someone who has installed a LH8 oil pan in an 88-98 truck. My truck is lowered so I don't want an oil pan that hangs below the crossmember at all. I've found that the Gen 3/4 truck oil pan hangs too low and the F-Body oil pan gives "Plenty" of clearance. Does that mean the LH8 pan is just right? From a few measurement sources it seems the LH8 pan is only about 1/2" to 3/4" shorter. Is that enough?

Mike