WTB: MAF sensor

[silverado_lover]

I'm not sure if there are different variations for Gen III motors but I need one for a 02 5.3.

Hit me up with what you have

[RPM Graphics]

is that 5 pin or 3 pin?

[silverado_lover]

I've searched and can't find the answer...anybody care to shed some light?

[DAmarcus28]

3 pin like mine

[chvy=power]

i have one $30 shoot me a pm

[RPM Graphics]

i have a 3 pin if that's what you need.

[silverado_lover]

I was reading the packet that came with the standalone harness and it says it is compatible with the 25179711 MAF sensor that was used on the 98-02 LS1 Camaros and 97-00 LS1 Corvettes.

I called to verify but didn't get an answer so I'm waiting on him to return my call.

[RPM Graphics]

do you have the harness? if so look at the plug for the MAF & see if it has 3 or 5 pins.
i have a 3 pin from the 02 camaro motor i'm putting in my truck but my harness is set up for the 5 pin so i had to get a 5 pin MAF & have the 3 pin MAF left over.
they do make a harness that goes from 3 to 5 pin if you want to go that route.
i'll take $30 shipped for the 3 pin i have, it's been de-screened.

[silverado_lover]

Funny thing...I can't find the MAF plug on the harness But I do have a separate IAT sensor plug which leads me to the conclusion that I do in fact need a 3 pin.

I'd rather not have a de-screened MAF though

[RPM Graphics]

yeah, sounds like you need a 3 pin. you should be able to find one on ebay fairly cheap. mine was de-screened when i bought the motor. i honestly don't know why someone would de-screen one. not like it has that much restriction to the air flow. i just wanted to let you know in case you were interested.