Im gathering parts for a 370 build, Since i live in the middle east and so i have to get the parts shipped from the US, Im going to throw diamond/wiseco dish pistons and callies H-Beams and if the budget allows i may be going with Billet i-beams, On a stock crank i know stock cranks can take alot of power if maintained right and was done right, Now if im going to use my stock crank do i have to rebalance? Because if i have to then im ordering a forged stock stroke crank, Here in kuwait we dont have *ANY* shop that can balance a crank, so i have to get it balanced and ready to be installed.

Also if im going to be pinning the mains, What is the material used to make the pins? "If you guys know it".

What upgrades i have to go with for the fuel system, i have a walbro now. 42lbs inj. Rest mods in the sig

And if you guys were in my place you would keep the fast and throw another set of heads trickflow maybe??

or go with L92/L76?

3rd is L92 with FAST car intake

This build is going to be daily driven/street raced Forged 370 truck with a single 88 Turbo.

65E is doing good and is prepped well but once im building this i will get a TC and an 80E with supporting mods, Eaton LSD is already here but not installed, I will gather all the parts then do it all in one time!

Im asking all this so i can get it shipped in as few packages as i can so i can save on shipping, shipping for a turbo kit alone is like 800usd "thats what kbracing gave me, but i didnt try to find other carriers or another shipping method"
Thanks in advance guys, I'll really apperciate any info.