Ok so i just got my motor put back in after the bag and body drop, and well it wont crank. I have checked it does have power at the fuse block in the engine bay to the starter but no keyed power, i have checked all fuses and everything seems fine, i dont have the fuel pump hooked up yet either but im not seeming to get keyed power there either, just the constant... I hate electrical stuff so any insight would help or at least something else to look at.. Also i had to extend the body harness from the firewall down to fuse block which was moved down to under the core support. all wires seem soldered nicely, so if i could find a wiring diagram that would be great.