Working on a 99 camaro v6 automatic. A guy that works for us put a motor in it. When you give it gas from a dead stop it makes a clicking sound like the converter bolts are loose. It mainly does it in drive. but will do it when your going in reverse and hit the brakes hard. It will not do it if the back of the car is lifted off the ground. It doesnt make any sense to me. All converter bolts are tight but the sound is coming from that area. Im at a loss.
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
cracked flexplate or rod brgs
'00 Silverado, '98 Trans Am, and a couple other toys.
Flex plate was fine upon instalation and the motor sounded fine before we pulled it out of the other car.
2004 Buell XB12s
Some driveshaft crap is hitting the floor in the rear. Look for witness marks. These cars are very flimsy and the suspension design is a joke. Parts flop all over the place.
I was under it when it was making the noise and it sounds like its coming from the converter area but I guess it could be traveling.
2004 Buell XB12s
could be a broken fin or whatever in the converter, happened to mine and could really hear it when the front end was lifted
Axekick tuned, Pacesetters, Servo.
Posting Permissions
Reply With Quote
