+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: trucks keeps stalling???

  1. #1
    Join Date
    Apr 2009
    Location
    Prince Edward Island, Canada
    Posts
    57

    trucks keeps stalling???

    Hey need a little help here my fathers truck keeps stalling when you slow down or stop, sometimes it fine but other times it stalls alot. Its a 2000 RCSB 5.3 auto. would it be the MAFS being dirty. any ideas let me know please and thanks.

  2. #2
    Join Date
    Jan 2005
    Location
    Humble/Houston TX
    Posts
    2,586
    clean the MAF and throttle body and report back.

    old mod list: H/C/I/N/E/G 408
    new mod list: 5.3, gears/posi, mufler and tune : (

  3. #3
    Join Date
    Jul 2008
    Location
    Racoon Twp., PA
    Posts
    1,572
    Does the speedo work?

    If the VSS is not being read, they will choke out when slowing down or stopping.
    2013 CC 5.3
    81 C10 LS1 project

  4. #4
    Join Date
    Apr 2009
    Location
    Prince Edward Island, Canada
    Posts
    57
    speedo works fine, will clean MAF and throttle body after work today and report back.

  5. #5
    Join Date
    Jan 2009
    Location
    Victoria, Tx
    Posts
    91
    My 2000 did the same - I had Patrick G tune it. He added air flow when the AC kicked on to lessen the stumble, and then adjusted the timing which helped alot, not sure what else he changed but it runs great now.

    Like you I changed 02 sensors, cleaned the TB, MAF, changed the fuel pressure regulator, I think I'm leaving a couple things off but never fixed the stumble till Patrick tuned it.
    67 Camaro SS 350 and a 67 Camaro back half car
    99 Z28 Camaro (Old motor - 585rwhp / 602 rwtq)
    97 Nissan Maxima
    00 Chevy Tahoe
    21 Model T Roadster Pickup
    65 FFR Shelby Cobra w/501ci BBF
    57 Willys CJ5 Jeep
    MD250 Mustang Dyno - EFI live

  6. #6
    Join Date
    Apr 2009
    Location
    Prince Edward Island, Canada
    Posts
    57
    so i cleaned the MAF it was dirty but it didn't fix the problem......what should i do next get the truck tuned????

  7. #7
    Join Date
    Jun 2009
    Location
    Screwston Tx
    Posts
    6
    its in the IAC position
    Cammed LS1

  8. #8
    Join Date
    Apr 2009
    Location
    Prince Edward Island, Canada
    Posts
    57
    IAC??? what is this??

  9. #9
    Join Date
    Feb 2007
    Location
    Spring, Texas
    Posts
    1,739
    Quote Originally Posted by the boy View Post
    IAC??? what is this??
    Idle air control

    2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive

  10. #10
    Join Date
    Jun 2009
    Location
    Screwston Tx
    Posts
    6
    I had the same problem with my 03 but i totaled it before i got it all worked out. Problem solved
    Cammed LS1

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts