Results 1 to 7 of 7

Thread: Attn: Allen :thumb:

Threaded View

  1. #1

    Attn: Allen :thumb:

    New Nelson tune installed last night. Truck fired ran great after about a 30 minute idle relearn period. Wouldn't stay running for sh*t... And when you crank it up it still hunts the idle sometimes. Anyway, no codes showed up but should i get the crank relearn done anyway? I have several buddies at the local GM dealership and they will do it free of charge...

    And whats the deal with the 400-500 mile period when everyone says it really comes alive. Is this something i will see? Or is that only in highly modified applications?

    I am happy with the tune so far although i only have about 200 miles on it. The shift is much better now.. especially at WOT.

    What would the vette servos benefit?

    Allen and Melissa are great folks to deal with. Very professional attitude on the phone, and that matters a lot in my book! I'm glad i chose the nelson tune. I've heard too many "horror" stories about a few other mail order tunes...
    Last edited by Warsteiner; 02-28-2009 at 04:15 PM.
    -2005 1500 Z71 ECSB 6.0 swap, Cooks Racing 4L80E, NP261HD, Carolina Driveline 5" shaft, CST Tie-Rods, front mount 76mm, Livernois hot pipes, Circle-D 258mm (~3500), Mallory 2-step, 100 Dry shot, 750CC RC Eng. Inj, Nelson Tuned, 4.10's, all through a STOCK 10-bolt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts