6.0 TakeOff Parts(Cheap)

[Kros383SS]

Drivers side exhaust flange with 02 sensor bunge--Free
Water Pump tapped for 1/8 NPT temp sensor,replaced
cause I had a squeak which turned out to be the new belt--$25
Drivers side truck manifold(one broken stud)--$20
Passenger Side Fbody manifold(two broken studs)--$20
Intake tube rubber coupler to TB--$5
A/c compressor bracket with tensioner--$10
EGR gaskets(three of them)--$5 SOLD
Battery postive connection box--$5
Front coolant crossover tube to TB--$10
Exhaust flange gaskets for drivers side(two of them)--$5

#317 heads with lifters and trays and pushrods..last exh manifold bolt hole on one of the heads had a broken bolt...has been drilled out...needs to be taken to a machine shop to repair...was going to do that with 5.3 heads--$50

for faster response email richard.krobot@iongeo.com it goes straight to my Blackberry

Thanks....

[IMG][/IMG]
[IMG][/IMG]

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[ChevyLee]

50 bux for those heads? wow that is dirt cheap!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! bump for great prices.

[green6.0]

If the heads are aluminum I will take em.

[ChevyLee]

they are alum 6.0 heads lol, 317s for 50 bux. what a deal

[rutroe]

Love the posters...!

[Kros383SS]

If the heads are aluminum I will take em.

Ok then just PM me about when and where!

[Kros383SS]

Love the posters...!

[ChevyLee]

haha, yea these posters are killar

[joakwin]

i want the heads if the other guy dont get them


i looking for a set of heads to learn how to diy p/p with

[Kros383SS]

i want the heads if the other guy dont get them


i looking for a set of heads to learn how to diy p/p with

Are you still interested?




Also bump for trying to get rid of this stuff.