-
Gator - Ramair2002
You guys headed out to HRP this afternoon? I'll be out there around 3:00 - 6:00 to finish tuning and make a few passes.
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
-
I'm going to try and be out there by 3:00 as well may be a little after. See you there Lance!
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
-
We made it out but there were too many racers and I couldn't get in line by Ramair2002 to talk to him until he left. There was way too much wind and no hooking up on the track for some reason. In fact there was so much wind that one of the guys literally had his door blown off on the track! My best run was a 13.7 @ 97
Maybe we'll have better luck next time....................My Bandito buddies had their Top Fuel bike out playing around today. Now that was pretty cool!
Last edited by NITROUS; 04-13-2008 at 09:05 PM.
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
-
Good to see you out there Lance! I got out there late as well. Next time we'll get out there when the gates open and hopefully the wind won't be as bad. I ran a best of 13.5 @ 99.80mph with a 2.09 60ft. It wasn't that I couldn't hook up it's just that I still don't know exactly how to launch with this turbo. Until next time!!
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules