+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: A Little Update

  1. #1

    A Little Update

    Well, some of you might remember the thread i started about wanting to change from dodge to chevy. I already had the lsx block at my house and almost closed the deal on an '04 rc/sb silverado.......and then i blew the motor in my truck......

    I was so ready to make the change, and with the setup i had planned was ready to hopefully make some low 10's/high 9's in a truck.
    So, for the price it would take to rebuild my motor and maybe transmission and then try to sell, it's just not worth it. I guess now instead of getting to join ya'll chevy guys i'm gonna have to stick with the hemi.
    BUT, i still wanna bring some competion, SO....i'm getting a forged 370 along with either a 250shot of nitrous or turbo (havent made up my mind yet) If ya'll would like, i'll keep you updated with pics and some vids when it's completed. wont be able to start 'til the summer though b/c of school. also, some good news, there's finally somewhat of custom tuning for the hemi through SCT!!! sorry for long post, just though some would like an update.
    -Later
    2004 RC/SB Hemi Ram
    Bolt on's, Comp 268 cam, Oasis 22's
    12.63 @106.48-125 shot with bolt-on's
    13.7- N/A with setup in sig. have a time slip with all the numbers but gotta find it first.
    New Numbers............BOOM!!!!
    New setup coming soon...

  2. #2
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,120
    keep us posted man
    THEY CALL ME G.

    AZRAEL

    2017 RZR 1000 2 SEATER
    2023 RZR 1000 XP 4
    2008 LTZ DURAMAX 3500
    2023 300S 5.7
    2023 BUICK ENCORE[/B]

    The difference between winning and losing, is having a 2nd stage.

  3. #3
    Join Date
    Aug 2006
    Location
    Willis, TX
    Posts
    724
    Yea keep us posted!!

    05 RC, LME 6.0, 243 Heads, LSA Rods, 11:25 Forged Pistons, Cam Motion Custom Grind, 4:10, Eaton LSD, Narrowed Rear-end w/ Chromoly Axles, Pacesetters LT's, SLP Loudmouth II Mufflers, Volant CAI, Yank SSTB3600, Bosch 42 lbs inj's, G-Force Tune, FLT Level 4 Trany, Belltech 2/4, Times: ?
    Facebook

  4. #4
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Yeah, I have been kinda wondering if you were ever gunna become a man and cross over from the dark side... How'd you blow your motor? Too much laughing gas?
    So you are going to do a Hemi block and bore it .040 over? Are you going to sell the LSX block and build the Hemi block? How is your 545RFE holding up?

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  5. #5
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Competition is a good thing!

    btw, where are all the fast Hemi's at? I mean the 10sec ones. Or some of the 11 sec ones?
    Got any links?

  6. #6
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    Quote Originally Posted by farmtruc View Post
    Competition is a good thing!

    btw, where are all the fast Hemi's at? I mean the 10sec ones. Or some of the 11 sec ones?
    Got any links?
    Yeah - or what about leprechauns and unicorns?

    Oh wait - they don't exist either.

    j/k - hope to see ya at the track...

  7. #7
    haha, thanks guys. there are a couple strokers that are running low 12's on motor. one's running 12.0's. he also ran an 11.4 on spray at like 120mph. i'll see if i can find a link. i'm going to keep my truck in full street trim so it wont be as fast as them. i like all my seats and my stereo. i'm hoping to run mid 12's though on motor and get some 10s on the 250 shot. the lsx block is already sold to one of my dad's friend. i tried to get to just build a badass race motor with it, but he loves his bigblocks. my motor is just going to be bored with forged internals. the trans is going to be built to handle 750hp. i'll see if i can find some links to the "couple" of fast hemi's. lol
    Last edited by badblackhemi; 04-01-2008 at 08:07 PM.
    2004 RC/SB Hemi Ram
    Bolt on's, Comp 268 cam, Oasis 22's
    12.63 @106.48-125 shot with bolt-on's
    13.7- N/A with setup in sig. have a time slip with all the numbers but gotta find it first.
    New Numbers............BOOM!!!!
    New setup coming soon...

  8. #8
    Quote Originally Posted by farmtruc View Post
    Competition is a good thing!

    btw, where are all the fast Hemi's at? I mean the 10sec ones. Or some of the 11 sec ones?
    Got any links?

    Here's what's in one guys sig that has a 370 stroker. i'm pretty sure his truck is gutted though. i think his nitrous run was a 100shot. as you could see he had some traction problems. lol. i'll see if i can find a link to some track vids.
    na run
    60'-1.65
    1/8-7.59
    mph-88.99
    1/4-12.025
    mph-110.61

    nos run
    60'-1.88
    1/8-7.443
    mph-97.74
    1/4-11.464
    120.89

    ok here is one of his n/a vids. i dont know if it's the camera but i hope my truck doesnt sound like his at idle.
    Video of 12.07 N/A - Photobucket - Video and Image Hosting

    The cam in this 370 sounds much better!! also, here's a 0-95 vid. he has an '03, so no custom tuning for him, listen to it bounce off the limiter.

    Sharadon Performance 370" Stroker - Video
    Hemi Ram Sharadon 370 Stroker 0-90mph - Video
    Last edited by badblackhemi; 04-01-2008 at 08:19 PM.
    2004 RC/SB Hemi Ram
    Bolt on's, Comp 268 cam, Oasis 22's
    12.63 @106.48-125 shot with bolt-on's
    13.7- N/A with setup in sig. have a time slip with all the numbers but gotta find it first.
    New Numbers............BOOM!!!!
    New setup coming soon...

  9. #9
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    5,301
    ah i found a 11 second hemi



    just photo shop this decal on any dodge truck and we got a race

    just messn man, gl on the dodge stuff

  10. #10
    haha, we can set up a race with mine when it's finished, how close to Stephenville are you? lol
    2004 RC/SB Hemi Ram
    Bolt on's, Comp 268 cam, Oasis 22's
    12.63 @106.48-125 shot with bolt-on's
    13.7- N/A with setup in sig. have a time slip with all the numbers but gotta find it first.
    New Numbers............BOOM!!!!
    New setup coming soon...

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts