im installing my gauges tom on my a-pillar. air/fuel ratio, water temp and oil preasure both those mechanical.....just wondering if anyone has in suggestions or tips on where they go from experience...thanks in advanced
im installing my gauges tom on my a-pillar. air/fuel ratio, water temp and oil preasure both those mechanical.....just wondering if anyone has in suggestions or tips on where they go from experience...thanks in advanced
2001 seirra 5.3L ex cab.-- 93 performance Nelson Tune,longtube pacesetter headers, ory, magnaflow with electric cut out, airaid cai, throttle body spacer, clear corners, 1400 watt system, 2 ifinity tens custom boxes, panasonic head unit, punch grill....sold :-(
09 camry se v6....gotta have a gas saver while in college...still gets up and goes tho
They go in the 2 1/16" holes in the A-pillar housing...
You shouldn't have a problem getting them in...just run the wires and everything like the instructions say. Try to find a stock hole throught the firewall...if not, drill your own and seal it up tight.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
