I made 6 of these and I'm going to sell 4. They are made to push your balancer all the way on with a deep socket. They are made of B7 material with heavy duty washers. This is the easiest tool you'll use to keep from beating your balancer back on. I'll post pics as soon as I have some time and all the proceeds will go to Allen for the website. I'll give the cost when I post the pics.
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
Pics yet??????
2007 CCSB Z71 VortecMax: Stock!
My freaking camera broke!!! When I took my stall pics yesterday there was a green line at the top. Now there's a black shadow in the photo's. When you view a picture the screen looks fine but when you go to take one the screen goes to sh@# and screws the pics up. I guess I'll have to send it in for repairs.
Ok, now that I've ranted and raved, the pusher is really simple, you get a 16mm stock with the end machined to keep the threads from bottoming out in the crankshaft. I'll try to get another camera tomorrow. I figure with my time and effort I'll ask $25.00 shipped. Like I said, the money will go to Allen to put towards the forums. You could make one of these but by the time you buy the material, nuts, washers and machine work you'll be over $20.00 unless you can find a piece of 16mm under a meter.
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
Like this?
02 Silverado
02 TrailBlazer
Yep, that's it except for the end has about 1/4" of thread undercut to keep from locking up when it bottoms out. Pretty damn simple huh? Let me know if anyone is interested? Thanks for posting a pic twobit!
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
I would highly recommend getting one. Works great.
02 Silverado
02 TrailBlazer
Posting Permissions
Reply With Quote
