Well after hitting a curb at 50 mph due to a dumb lady that almost T-boned me and wife I now have a bent left rear axle tube and am wanting to get some inputs and suggestions on what ratio would be best for my set up. I do mainly short drives around town and tow maybe 2 times out of the month on the freeways . I'm going to double check but I'm almost certain I have 3.23 gearing now ( yes mpg is horrible lol)
Just to add I now have 33s because I had to replace my knuckles ,ball,joints,wheel bearings ,leaf springs and the works because of this lady and they only offered a 3 inch lift spindle vs my 4 inch up front and the 35s rubbed everything after the one inch drop. This i Costing me a fortune .
Thanks And if you know someone or have one let me know


Reply With Quote
