+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 36

Thread: Nelson Performance Harness(s)

  1. 03-06-2012 05:00 PM #1
    HPICamaroSS's Avatar
    HPICamaroSS
    HPICamaroSS is offline Senior Member
    Join Date
    Jun 2009
    Location
    Caledonia, MI
    Posts
    322

    Nelson Performance Harness(s)

    I finally got a hold of somebody at Nelson today ( called all day yesterday and this morning). When Erica answered the phone I told her what I was doing with my truck and I asked her what my options were for harnesses. She said the complete standalone harness would run me 650 ( which i expected). Then I asked about them reworking my old harness and she said they don't do that. Is it me or is this a misunderstanding? From what I've read on this forum and other forums, they will rework my factory harness for 450. Im not sure if she didn't understand me or maybe they just dont offer it anymore. I did ask about them selling computers and they run 75 bucks which seems like a decent deal. If your looking for one you might as well buy it from them and have them tune it while its there....NOW I just have to figure out what I am going to do for my harness because I was planning on having them rework my old harness
    Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
    Reply With Quote Reply With Quote
  2. 03-06-2012 05:13 PM #2
    BigMac's Avatar
    BigMac
    BigMac is offline Senior Member
    Join Date
    Mar 2010
    Location
    Midland, TX
    Posts
    479
    Correct me if I'm wrong but.. maybe their price on reworking a current harness refers to chopping up a current Gen III+ harness and not an old NBS harness.
    - 5.3 Stock Internals - Cal Speed Stainless LT's - 18" Magnaflow - K&N Drop In - Airaid Intake Tube - Nelson Tune -

    Shopping List
    - Cam - 3200 Circle D Stall - 10" King Coilover Shocks - 16" King Reservoir Shocks - FG front Fenders - 17" Methods -
    Reply With Quote Reply With Quote
  3. 03-06-2012 05:29 PM #3
    myzterray's Avatar
    myzterray
    myzterray is offline 17 Second Truck Club
    Join Date
    Sep 2011
    Location
    Atlanta Ga
    Posts
    692
    She probably thought you were talking about the obs truck harness. Call back and see
    Reply With Quote Reply With Quote
  4. 03-06-2012 05:37 PM #4
    Grumpy's Avatar
    Grumpy
    Grumpy is offline Junior Member
    Join Date
    Jan 2012
    Location
    D/FW
    Posts
    19
    I'm getting a stand alone made up... and from the pics I've seen they look awesome!
    1968 GMC - Carb'd and cam'd 6.0 LY6, 200-4r, 3.73 posi 12 bolt
    2006 TrailBlazer SS - 13 sec. grocery getter
    Reply With Quote Reply With Quote
  5. 03-06-2012 05:41 PM #5
    HPICamaroSS's Avatar
    HPICamaroSS
    HPICamaroSS is offline Senior Member
    Join Date
    Jun 2009
    Location
    Caledonia, MI
    Posts
    322
    I have both harnesses. I have my factory OBS out of my 94 and I have the LS harness from the 6.0
    Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
    Reply With Quote Reply With Quote
  6. 03-06-2012 06:12 PM #6
    myzterray's Avatar
    myzterray
    myzterray is offline 17 Second Truck Club
    Join Date
    Sep 2011
    Location
    Atlanta Ga
    Posts
    692
    Quote Originally Posted by HPICamaroSS View Post
    I have both harnesses. I have my factory OBS out of my 94 and I have the LS harness from the 6.0
    Yea she probably thought u meant the 94 harness
    Reply With Quote Reply With Quote
  7. 03-06-2012 06:21 PM #7
    HPICamaroSS's Avatar
    HPICamaroSS
    HPICamaroSS is offline Senior Member
    Join Date
    Jun 2009
    Location
    Caledonia, MI
    Posts
    322
    So basically they take the LS harness and just make it into a "standalone" harness?
    Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
    Reply With Quote Reply With Quote
  8. 03-06-2012 06:25 PM #8
    myzterray's Avatar
    myzterray
    myzterray is offline 17 Second Truck Club
    Join Date
    Sep 2011
    Location
    Atlanta Ga
    Posts
    692
    Quote Originally Posted by HPICamaroSS View Post
    So basically they take the LS harness and just make it into a "standalone" harness?
    yea u ship them your harness they re work it and send it back. when i was shopping around i considered it but i ended up just doing it myself. came out pretty good and it works! saved me 500 bucks so im pretty happy about it.
    96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /


    http://www.ls1truck.com/forums/lsx-t...ders-pics.html
    Reply With Quote Reply With Quote
  9. 03-06-2012 06:30 PM #9
    HPICamaroSS's Avatar
    HPICamaroSS
    HPICamaroSS is offline Senior Member
    Join Date
    Jun 2009
    Location
    Caledonia, MI
    Posts
    322
    Quote Originally Posted by myzterray View Post
    yea u ship them your harness they re work it and send it back. when i was shopping around i considered it but i ended up just doing it myself. came out pretty good and it works! saved me 500 bucks so im pretty happy about it.
    Ya I sat down and look at it...my OBS harness is easy....the rats nest thats 3" in diameter on the LS harness is what scares me LOL.
    Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
    Reply With Quote Reply With Quote
  10. 03-06-2012 06:39 PM #10
    myzterray's Avatar
    myzterray
    myzterray is offline 17 Second Truck Club
    Join Date
    Sep 2011
    Location
    Atlanta Ga
    Posts
    692
    Quote Originally Posted by HPICamaroSS View Post
    Ya I sat down and look at it...my OBS harness is easy....the rats nest thats 3" in diameter on the LS harness is what scares me LOL.
    its not that bad once you get into it. hardest part for me was removing all the insulation..PITA for sure. but the actual wiring part is fun. lol
    96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /


    http://www.ls1truck.com/forums/lsx-t...ders-pics.html
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules