Hey I just bought a 2000 GMC 1500 with a 5.3 auto and 3.73s. The clicking sound its supposed to make every time you signal stays on. It signals fine all the lights work correctly but when I turn them off it continues clicking. I already replaced the relay and it didnt help. I can feel the relay is the scource of the sound but cant pinpoint the cause. Help anybody?
2000 Chevy rcsb 5.3, 4L80E, 3.43 G80, P&P heads, Isky tripple 12, EFI LIVE
My be the multifunction switch(turn signal lever) shorted. Some times the ground circuit melts on the back of the switch.
5.3, E-fans, LPP longtubes w/offroad Y, Dual Magnaflow, K&N Cold Air, 160 thermo, Voodoo 212/218 .531/.531 113 cam, Nelson Tune, 4:11, Built 4L65E, TrailBlazer converter. SOLD
_____________________________________
2006 2500HD 6.0L Crew Cab 2WD
Thats a pain in the arse to fix. Gotta pull the airbag and steering wheel and replace the whole assembly. I broke my hazard button installing a stereo .Originally Posted by Jermoslin
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.
if you get a torx bit...and use a 1/4 inch wrench you can do it without pulling the wheel. Takes a few minutes because you can only turn it 1/100 of a turn at a time...but still easier.
blown transmissions are about as useful as 97% of the guys on this forum
Alright thanks I'll look into it. That switch is expensive! Everything works so i'll check if I can see anything I can fix, if not i'll just turn up the stereo.
2000 Chevy rcsb 5.3, 4L80E, 3.43 G80, P&P heads, Isky tripple 12, EFI LIVE
Posting Permissions
Reply With Quote
