where is a good place to get a good shift kit for a 4l60e, and whats a servo?
where is a good place to get a good shift kit for a 4l60e, and whats a servo?
you can get a shift kit form any of the sponsors. give allen a call at nelson performance, get the hd2 kit.
Corvette Servo for the 700R4 (4L60), 4L60E. This servo is a must for any performance, towing, RV/off-road application, but would be a nice upgrade for any 700R4 or 4L60E. Right away you'll notice faster and firmer 1-2 and 2-3 shifts. This servo will give your transmission 50% more apply pressure, just what you need to keep from burning your transmission up under heavy load situations. This servo is easy to install and can be done with the tranny in the truck.
01CamaroZ28
10.751 @ 124.26 mph with a 1.446 60ft
ALL THRILLS NO FRILLS!!!!
B&L Racing stg 1 heads 224/581 cam.
06 silverado 6.0L VMAX LPP LT's, Volant CAI, Manaflow, NELSON TUNE.
WE offer a shift and servo here at Nelson Performance
the servo is 25.00
Shift Kit Transgo 4L60E *Kit is 127.00 plus shipping
includes Piston, Seal, Plate 4L60E V Body
please call to place an order.
thx
210-626-0278
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
Dang she's good.Originally Posted by Melissa@NelsonPerformance
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
I'll be going for that pretty quick. What modification requirements?
None. You can do these mods on a 100% stock truck if you want.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
how hard would it be to install these kits...could i do it in my garage with basic tools
I meant modifications to the valve body or the likes. I'll be ok if you say none to that as well.
you can install them in a stock truck.
you will need to drill the plate. and install all the springs where they want them. be careful to not lose any check balls. recommend a new filter while your there.
i personally like 2 washer with one gold ring on the corvette servo. shifts real nice then.
01CamaroZ28
10.751 @ 124.26 mph with a 1.446 60ft
ALL THRILLS NO FRILLS!!!!
B&L Racing stg 1 heads 224/581 cam.
06 silverado 6.0L VMAX LPP LT's, Volant CAI, Manaflow, NELSON TUNE.
Don't the servo fit in the side of the tranny? And how is the servo $25 and shift kit over a $100?
I thought shift kits were like about $60.....
04 Silverado Z-71 Extended Cab
Magnaflow, 10.4 TV 50 wires, tr-55ix, Synthetics, HID's, JL audio, 33.5", leveling kit, tuned, CAI, vette servo, cam, valve job, pacesetter. 9.3@77.5 and 14.5@93.4
06 2wd
custom cam, tune, 3.73's, servo, HID's, 10.4mm wires, long-tubes, CAI, magnaflow, 2.5" shackles, Circle-D 3200, UD, JL Audio 4.1, Alpine 5ch
Posting Permissions
Reply With Quote
