Well tonight lost the 4l60e launched hard in 4hi then nose dived and took off again and only has 1st now.... ftl lvl 5 is going in.... What all will i need to do this i know new stall fly wheel and the cross member anything else?
Well tonight lost the 4l60e launched hard in 4hi then nose dived and took off again and only has 1st now.... ftl lvl 5 is going in.... What all will i need to do this i know new stall fly wheel and the cross member anything else?
VSS and wiring harness or you can do it yourself.
heres a link to the wiring its simple took me like 5 mins.
4L60E to 4L80E Wiring Swap - Page 3 - PerformanceTrucks.net Forums
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
driveshafts, some kind of adapter for the t case, I think you can use the same flexplate.
01 ecsb 5.3 4x4 z71
Avalanche 17s and a pant load of miles
61 Corvette
350, 4 speed, 4.56's
32 Ford 4 door sedan
keeping it "stockish"
im runnin my stock driveshaft stil but im 2wd
2003 silverado x-cab stepside fully loaded..nelson tune..green CAI..160 thermostat..ls6 intake..pacesetter LT's..3"magnflow hi-flow's..one chamber flow dumped..4L60E PATC 1-2 servo 4th servo..trans go HD-2..ridn 24's...2" 4" drop..detroit tru trac an 4.10's setin n the shop waiting
stock drive shaft will have to be cut short about an inch, with the 80e yoke put on and a new U joint, you can get the U at the part store its a precision, part number 488Originally Posted by wstewart58
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
need a flexplate of a 98 f-body, its a dished plate and will keep you from having to use the spacer
2006 silverado SS....Clifford Jr...turbo coming soon
1970 Chevelle ly6 swap....d1 coming soon
Posting Permissions
Reply With Quote