im trying to figure out what intake manifold to go with for my 5.3 build this summer. im going to have some ported and milled 862s, 226/230 cam on 111 lsa and I would really like to go with either the vic jr. or proflow xt. my truck weighs right under 4000 lbs and i have 4.10s, 28'' slicks and im getting a circle d 3600 stall. so which intake and why?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
anybody?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
i like the look of the vic jr but i havent seen any data on how it stands up to fast or any other intake manifold
pro flow!
since you only named vic jr or pro flow
if you are staying NA i would go with the pro flow
Name: Mark,
God created turbo lag so nitrous trucks could have a chance.
http://www.ls1truck.com/forums/my-ga...tml#post274877
Ok. It should make some killer top end huh?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
i personally think you would see gains and a nice wide curve with the proflow at bottom and up top, more being up top.
i would also think a 4k stall and a taller gear
you plan on spraying ?
Yea I'm gonna be spraying a 125-150 shot. I want a 4k stall but I don't want to pay the extra $400
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Originally Posted by o2camaross
understandable, i would look for any small size stall ( if its cheap enough ) then have chris restall it to what you want? just a thought
Yea that's an option. Well imma go with the proflow then. What all do I née to make it work with my build. Also need a tb and it has to be dbw
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Posting Permissions
Reply With Quote
