need of some pinouts

[mcgojosh]

Does any one happen to have the pinouts for the 94 obs ecu? and for 2001 fuse box connectors? that they could share.

[92 6.0]

Here is a link to the fuse box connector.New Page 1
And I might be able to scan the wiring diagrams in my haynes manual that I used for my 92. Just let me know what ya need.

[93sixxoh]

Not trying to thread jack
But i need these pinouts as well. might try to get my gauges working this weekend if i got time. my gauges just sit there so theres no power

[mcgojosh]

Here is a link to the fuse box connector.New Page 1
And I might be able to scan the wiring diagrams in my haynes manual that I used for my 92. Just let me know what ya need.

I have the haynes also but i pulled a the pink and white 12v ignition wire out of the obs ecu connector by accident. I was hoping to find out what pin in the connector it is, to put it back in.

[92 6.0]

I have the haynes also but i pulled a the pink and white 12v ignition wire out of the obs ecu connector by accident. I was hoping to find out what pin in the connector it is, to put it back in.

Oh the best help I could be is to say just look at the diagram and find the ones closest to those two wires. By the way why do you need the obs ecu?

[mcgojosh]

Im not so sure that i need it yet. I havent found a wiring diagram for the 4wd system yet so i don't know if i need the ecu to operate it. or even how to wire it in.

[KootFly]

I have complete 95 GM manuals for unit repair and electrical if that helps which diagrams do you need exactly? These are for K1500-3500 I believe inclusive is 4x4

[mcgojosh]

I have complete 95 GM manuals for unit repair and electrical if that helps which diagrams do you need exactly? These are for K1500-3500 I believe inclusive is 4x4

if you have the wiring for the transfer case that would be benifical to me.

[KootFly]

I'll scan them in the next couple of days and post them or email them....

[92 6.0]

Yeah I could use those diagrams too. I have to respline my np241 and put it back in cause I dont want to have to wire in the switches for the 243 i got with my trans.