I was wanting to install a floor shifter, my truck has the center console w/ drink holders, i want to get rid of the holders & put the shifter there....has anyone done that or have any info...also a after-market auto 4 sp shifter..
I was wanting to install a floor shifter, my truck has the center console w/ drink holders, i want to get rid of the holders & put the shifter there....has anyone done that or have any info...also a after-market auto 4 sp shifter..
2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites
a few have done it but if your running a electronic controlled tranny there is no reason to manually shift it.
2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites
a shifter for a 700r4 will work
2006 SilveradoLittle Black Bitch
well when the time comes for me to be auto again i was planning on trying to use the tbss shifter and fabb'in it to work with my console currently as i do now for my 6spd.
i havent seen one aftermarket shifter thta is tasteful that is worth putting in a "non-race" vehicle.
I looked at hurst and b&m, never could find anything.....thanks
2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites
Here's the tow/haul a$$ button:
![]()
2000 Sierra rcss, LS6, xr265hr-15, HP Tuner, B&M, traction, cai, 2-4, 3.73 G80, Centerline, Pacesetters w/custom pipes and mufflers
i ran the b-m hammer shifter in my old truck,any 700r4 shifter will work,you will just need to relocate to tow/button.