5.3 to 6.0 cam

[bpanzer]

I have a TR 220/220/ .556/.556 on a 112 + 4 cam.

I bought this for my 2001 5.3 that has full bolt on's. My intentions were to install this cam after the first of the year along with a TT3000 on a 4L60E.

I ended buying a 2000 Chevy 4x4 2500 with a 6.0 and 4L80E this weekend. Would this cam work well in the 6.0 and if so, should I stick with a TT3000 or drop down to the TT2600? This truck is basically stock with a cat-back system.

This will be my daily driver and used to tow from time to time but not often and nothing heavy. It has 3.73's, lift and 33 inch tires. I will be adding LT's and remove the cats and add electric fans within a couple of weeks. I'm not sure yet as what or how I'm going to upgrade the intake.

The truck will be used off road in sand and mud on occasion.

[r.barn]

Wont hurt anything.

[mean05]

stay with the 3000...to me a 2600 isnt even worth the time to put it in

[George C]

I have a TR 220/220/ .556/.556 on a 112 + 4 cam.

I bought this for my 2001 5.3 that has full bolt on's. My intentions were to install this cam after the first of the year along with a TT3000 on a 4L60E.

I ended buying a 2000 Chevy 4x4 2500 with a 6.0 and 4L60E this weekend. Would this cam work well in the 6.0 and if so, should I stick with a TT3000 or drop down to the TT2600? This truck is basically stock with a cat-back system.

your trans should be an 80e. and an 80e stock stall is close to 2600 now or little higher.